The SM1 is an inexpensive portable saturation monitor designedspecifically for the aquaculturist. The monitor displays % Saturation- TDGP divided by BAROMETRIC pressure - using a new, small probe. High accuracy (0.1% resolution) is made possible by SM1's quick and simple calibration. Any length of probe cable may be used allowing flexibility for portable and/or permanent installations.Equilibration time at 11° C is 5 minutes.

SPECIFICATIONS: MODEL SM1

DISPLAY PANEL:

3/4 inch high 4-digit LCD display readable from 10 meters

Displays % of saturation (Pt/BAR) x 100 in 0.1 % increments


 CONTROLS:

Power Off/On switch and calibration adjust

          PROBE:

          9 1/2" long X 1 3/4" OD PVC probe housing with provisions to replace membrane cartridge and/or pressure sensor. Disassembly and component replacement can be completed in just minutes. Probes are interchangable.


        CABLE:

Available in lengths to 500 meters with either standard laboratory cable or high strength oceanographic-quality polyurethane-jacketed #24AWG PVC -Insulated wire.


POWER:

9-volt battery (meter draws 10mA current)


OPTIONS:

External AC to DC powerpack and Internal rechargable NICad battery pack

Air Saturation Monitors For Water Quality In Aquaculture, Fisheries & Industry

Back To Main Page

| Total Dissolved Gas/O2 Monitor | Wireless Probe| Saturation Monitor |
| New From CSI| E-mail Us |



© 1996-2008 Common Sensing Inc. All Rights Reserved.